WUXI KENKE INTELLIGENT EQUIPMENT CO.,LTD.
“Science and Technology Create Value, Honesty Create KENKE"
Add to Cart
The HJ500 Welding Positioner Turntable is a high-precision, heavy-duty solution for large pipe and tank fabrication. Built with high-strength steel, all welded parts undergo stress-relief treatment to prevent deformation over long-term use.
Equipped with dual-drive servo motors, this positioner ensures precise, smooth, and continuous 360° rotation. It features both wireless remote and PLC control, allowing operators to control rotation manually or via pre-programmed automation.
| No. | Item | Unit | Parameter |
|---|---|---|---|
| 1 | Load Capacity | t | 50 |
| 2 | Rotation Torque | n.m | ≥50000 (Dual-Drive) |
| 3 | Worktable Diameter | mm | φ4000 |
| 4 | Table Height | mm | 1250 (excluding foundation pads) |
| 5 | Rotation Angle | ° | 0°～±360° (Continuous Unlimited Rotation) |
| 6 | Rotation Speed | rpm | 0.005 - 1 |
| 7 | Speed Accuracy | ≤1% | |
| 8 | Radial Runout | mm | ≤0.5 |
| 9 | Axial Runout | mm | ≤0.5 |
| 10 | Speed Control | Servo Drive | |
| 11 | Motor Power | kW | 2×11 (Dual-Drive) |
| 12 | Control Mode | Wireless Remote & Programmable PLC | |
| 13 | Conductive Capacity | A | 2000 |
| 14 | Workpiece Compatibility | Supports workpiece diameter ≥φ4000 for welding and cleaning |
Yes, we provide tailor-made solutions based on your specific requirements.
Standard seaway transportation is used. Rail-sea combined transport is also available.